Aluminum fabrication in Bangalore Cost rates for Sliding Windows Partitions Structural glazing ACP work

QUOTATIONS FOR ALUMINUM FABRICATION BELOW WORKS MENTIONED BELOW

Rates for Aluminum fabrication in Bangalore know about aluminum fabrication rates Bangalore based on the present market rates which includes aluminum partition rates, doors, aluminum sliding windows rates for two and three track windows, sliding windows, sliding doors, mesh, glass work, ACP rates (Aluminum Composite Panel), patch fittings, ss railings etc.

Its recommended consulting with the hired architects to work on the project and take suggestions and drawings for fabrication work.

No 1: ALUMINUM FABRICATION IN BANGALORE

• a) Two Track Aluminum Sliding Window (with powder Coating):
  The aluminium fabrication rates in Bangalore for windows are given below. Material Used: 61.5mmx45.5mmx1.2mm thickness aluminium Section for outer Frame.40mmx1.8mmx1.2mm thickness aluminium Section for window Shutters 4mm Plain Glass, TPI wheel TVS or EPDM gasket, Star lock, weather Proof Silicon Sealant.
  Per Square Feet Rs.180/-
  .
  1.5mm aluminium thickness per square feet Rs.195/-.
  Jindal makes aluminium Section.Extra 20% Per Square Feet.
  Colour 1 way glass Extra Rs25/- to 40/- Per Square Feet.
  Without Powder Coating less Rs 20/- Per square feet.
  .
• b) Three Track Aluminum Sliding Window RATES.
  Material Used: 90mmx45.5mmx1.2mm thickness aluminium Section for the outer frame, 40mmx1.8mmx1.2mm thickness aluminium Section for window Shutters, 4mm Plain glass, TPI wheel, TVS or EPDM gasket, Star lock, weatherproof Silicon Sealant, Stainless Steel Mesh, or aluminium mesh.
  Per Square Feet Rs 220/-
  .
  1.5mm aluminium thickness Rs 240/- Per Square feet.
  “Jindal make”aluminium Section, Extra Rs 30/- Per Square Feet.
  Colour 1 Way glass, Extra Rs 25/- to Rs 40/- Per Square Feet.
  Without Powder Coating, Less Rs 20/- Per Square Feet.
  .

No 2 : ALUMINUM PARTITION (with Powder Coating)

• Material Used: The aluminium partition rates 60mmx40mmx1.2mm thickness Single groove & Double groove Locking Clip TVS & EPDM gasket, 4mm Plain glass, 9mm Novo pan sheet, Silicone Sealant.
  Per Square Feet Rs 180/-
  .
  Without Powder Coating Rs 160/-
  1.5mm aluminium thickness Rs 200/-
  Jindal makes aluminium Section. Extra Rs20/- Per Square Feet.
  Colour 1 way glass Extra Rs 25/- to Rs 40/-.
  .

No 3: ALUMINUM OPEN DOOR (with powder coating)

• Material Used: Aluminum door rates Bangalore 50mmx50mmx1.2mm thickness door vertical, 100mmx50mmx1.2mm thickness door bottom, 50mmx50mmx1.2mm thickness door top & centre, TVS gasket, door lock, door handle, Pivot, Locking clip, door stopper, 9mm NOVO sheet, 4mm plain glass or pinned glass, door rod.
  Per Square Feet Rs 250/-
  .
  .1.5mm aluminium thickness Per square feet Rs 275/-
  Jindal makes aluminium Section Extra Rs 20/- Per square feet.
  Colour 1 way glass. Extra Rs 25/- to Rs 40/- Per square feet.
  Without Powder Coating less Rs 20/- Per square feet.
  Door Closer changes extra.
  .

No 4: ALUMINUM SLIDING DOORS (with Powder Coating)

• Material Used : The sliding door rates 50mmx50mmx1.2mm thickness door vertical,100mmx50mmx1.2mm Thickness door Bottom, 50mmx50mmx1.2mm thickness door top & centre, TVS gasket, door lock, door handle, pivot, locking clip, door stopper, 9mm NOVO per sheet, 4mm plain glass, or pinned glass, door rod, C ‘Gear Wheel, C Gear, C Gear Channel.
  Per Square Feet Rs 280/-
  .
  1.5mm aluminium thickness per square feet Rs 350/-
  Jindal makes aluminium Section Extra Rs 20/- per square feet.
  Colour 1 way glass. Extra RS 25/- to Rs 40/- per square feet.
  Without Powder Coating Less Rs 20/- per square feet.
  .

No 5: ALUMINUM GRILLED MESHWORK

• Material Used: The aluminium grilled meshwork rates for 50mmx25mmx1.2mm thickness aluminium plain section, 4”x4” aluminium Grilled mesh, grilled locking clip.
  Per square feet Rs 180/-
  Per Running Feet (RFT)
  

No 6:  ALUMINUM GLASS WORK

• a)Aluminum Fish Bottom glass work. (12mm tough glass).
  Material Used: Fish bottom or fish mouth aluminium powder coating section, 12mm Toughened glass, weatherproof Silicon Sealant.
  Per Square Feet Rs 350/-
  .
• b) Aluminium fish bottom glass work.(10mm tough glass).
  Material Used: Fish bottom or fish mouth aluminium powder coating section. 10mm Tough glass, weatherproof silicone sealant.
  Per Square Feet Rs 280/-
  .
• c) Aluminium fish bottom glass work (12mm plain section).
  The material used: Fish bottom or fish mouth with aluminium powder coating section, 12mm plain glass weather Proof Silicon sealant.
  Per Square Feet Rs 220/-.
  .
• d) Aluminum Bottom glass work (10mm plain section).
  A fish bottom or fish mouth aluminium powder coating section, 10mm plain glass, weatherproof silicone sealant.
  Per Square Feet Rs 200/-.
  .

No 7: ACP GLAZING WORK. ACP Cladding rates

• Material used: ACP glazing rates in Bangalore for 65mmx50mmx1.2mm thickness aluminium clip section, 65mmx40mmx1.2mm thickness aluminium plain section, with powder coating for glazing work. 50mmx25mmx1.2mm thickness aluminium plain section for ACP frame, 5mm 1 way glass (Any suitable colour) 4mm ACP sheet, weatherproof silicone sealant.
  Per Square Feet RS 220/-.
  .

No 8: GLASS PATCH FITTING WORK.

• Material Used: Side fixing plate with a pivot (Satin nickel, chrome plated). Over panel and Side Panel with pivot (satin nickel, chrome plated). Bottom pivot with stainless steel fixing plate, S/S handles suitable size, floor spring 12mm plain or 12mm Tough ended glass, 10mm Plain Glass, or tough ended glass locking systems.
  Per Square Feet Rs 700/- to Rs 2000/-. Depends on Quality.
  .

No 9: SHOWER ROOM GLASS WORK

• Material Used: S/S wall to glass hinges, S/S glass to glass hinges, S/S fixed hinges, S/S wall to Glass connector, S/S wall to pipe connector, S/S bottom guide, top guide, round knob, Sliding Door Roller. 8mm or 10mm plain glass or tough ended glass, Floor spring. S/S handle locking system.
  Per Square Feet Rs 400/- to Rs 1200/-.
  .

No 10: STAINLESS STEEL RAILINGS WORKS (Jindal Make 304 Grade)

• Material Used: 2’’ X 2’’ X 16Gauge, 11/2 ‘’ X 11/2’’ X 16 Gauge Round Pipe, 1’’ X 1’’ X 16Gauge Round Pipe.
  Per Running Feet (RFT) Rs 1350/- Feet.
  .

No 11: STAINLESS STEEL RAILINGS WORKS (Jindal Make 202 Grade)

• Material Used: – 2’’ X 2’’ X 16Gauge, 11/2 ‘’ X 11/2’’ X 16 Gauge Round Pipe, 1’’ X 1’’ X 16 Gauge Round Pipe.
  Per Running Feet (RFT) Rs 1100/- Feet.
  .

SAMPLE TERMS & CONDITIONS 

• Vat – Extra
• Transport – included
•  Payment Terms
• 50% Advance along with the order
• 25% before the Fixing
• 25% on Completion
• Scaffolding Extra.
  .

Note: These are the Standard Aluminum fabrication rates for different works. We have compiled these costs based on the various quotations that we have received from our Aluminum Fabricators.